NS0-505日本語講座、NS0-180問題と解答
NO.1 Regarding clustered Data ONTAP 8.3, what happens to the roles of the on board ports, HBAs,
and NICs?
A. The roles are divided into two categories: Data Management and Node Management.
B. These roles are assigned based on the controller type.
C. These roles are predefined and must be changed before creating your LIFs.
D. These roles are assignet when LIFs are created.
Answer: D
NS0-180認定資格試験 NS0-180オンライン試験
Explanation:
In earlier releases of Data ONTAP, default roles were assigned to each Ethernet network port. The
roles included data, cluster, cluster management, intercluster, and node management. In Data
ONTAP 8.3, these roles are assigned when LIFs are created.
Reference: Clustered Data ONTAP 8.3, Network Management Guide, page 7
NO.2 What network information is required to set up any Cisco switches attached to a clustered Data
ONTAP system? (Choose two.)
A. Host names and IP addresses for each of the controllers and configured switches are required.
B. All management ports configured for e0d or the service port (wrench icon) are required.
C. The appropriate number and type of cables and cable connectors for your switches are required.
D. VLAN tags for each interface are required.
Answer: A,C
NS0-180ガイド
Explanation:
C: You need the following network information for all switch configurations: *Two or more IP subnet
addresses for cluster network and management network traffic
*Host names and IP addresses for each of the controllers and all applicable switches
*Management network port assignments for your controller
D: To configure your cluster, you need the appropriate number and type of cables and cable
connectors for your switches. Depending on the type of switch you are initially configuring, you need
to connect to the switch console port with the included console cable.
Reference: Clustered Switch Setup Guide for Cisco Switches, page 8
https://library.netapp.com/ecm/ecm_download_file/ECMP1115327
NO.3 You are adding nodes to an existing cluster.
In this scenario, which three statements are correct? (Choose three.)
A. You must add a cluster switch for every two nodes.
B. If you are adding nodes to a multiple-node cluster, more than half of the existing nodes in the
cluster must be healthy.
C. The switchless cluster functionality is supported only in a single or two-node cluster.
D. If you are adding nodes to a two-node switchless cluster, you must have installed and configured
the cluster management and interconnect switches before adding additional nodes.
E. If you are adding a second node to a single-node cluster, the second node must have been
installed, but the cluster network can be configured later.
Answer: A,B,D
NS0-180トレーニング資料 NS0-180参考資料
Explanation:
C: If you are adding nodes to a multiple-node cluster, more than half of the existing nodes in the
cluster must be healthy (indicated by cluster show).
E: If you are adding nodes to a two-node switchless cluster, you must have installed and
configured the cluster management and interconnect switches before adding additional nodes.
Incorrect:
not A: If you are adding a second node to a single-node cluster, the second node must be
installed, and the cluster network must be configured.
Not D: The switchless cluster functionality is supported only in a two-node cluster.
Reference: Adding nodes to the cluster
https://library.netapp.com/ecmdocs/ECMP1636037/html/GUID-B13FF812-785E-4E62-
991430E7A8F51A4C.html
NO.4 What is NetApp's best practice regarding Ethernet flow control?
A. Disable flow control on the host, switch, and all node ports.
B. Disable flow control on the switch ports.
C. Leave flow control enabled.
D. Disable flow control on all 10Gbps ports.
Answer: D
NS0-180ソリューション
Explanation:
The NetApp Best Practice specifies that Flow Control settings for 10G cluster ports are to be set with
Flow Control = None.
Reference: How to modify the Flow Control setting on clustered Data ONTAP cluster ports
https://kb.netapp.com/support/index?page=content&id=1015245&actp=LIST_RECENT
NO.5 You want to install a new clustered Data ONTAP 8.3 system.
The customer wants to use open ports on interconnect switches from a different system with
clustered Data ONTAP 8.2 because they are running out of space in their rack.
What should be considered in this scenario?
A. You can use all free network ports for the cluster interconnect.
B. A maximum of two clusters per switch pair are qualified and supported, but you should use
trunked ports.
C. You can only use dedicated ports for the clustered interconnect.
D. Only one cluster per switch pair is qualified and supported.
Answer: C
NS0-180サンプル
NO.6 Your customer received an HA pair of FAS8040 nodes with two half-populated disk shelves
which they want to add to their cluster. When you arrive to add the nodes to their cluster, the
customer informs you that they have 24 NSE drives that they want to use to fully populate two of the
disk shelves.
What should you do in this scenario?
A. Inform your customer that they cannot mix NSE drives and regular hard disks in a storage system.
B. Comply with your customers request, and add the NSE drives before you add the nodes and disk
shelves to their cluster.
C. Move all the NSE disks into one shelf and all the hard disks into the other shelf before you install
the new HA pair.
D. Change the boot variable bootarg.strorageencryption.support to false.
Answer: A
NS0-180合格点
Explanation:
All disks in the storage system and optional attached disk shelves must have
encryption functionality to be able to use Storage Encryption.
You cannot mix regular non-encrypting disks with self-encrypting disks.
Note: NetApp Storage Encryption (NSE) is NetApp's implementation of full-disk encryption (FDE)
using self-encrypting drives from leading vendors.
Reference: Clustered Data ONTAP 8.3, Physical Storage Management Guide
https://library.netapp.com/ecm/ecm_download_file/ECMP1636022
Pass4TestのNetwork ApplianceのNS0-505日本語講座の試験問題は同じシラバスに従って、実際のNetwork ApplianceのNS0-505日本語講座にも従っています。弊社はずっとトレーニング資料をアップグレードしていますから、提供して差し上げた製品は一年間の無料更新サービスの景品があります。あなたはいつでもサブスクリプションの期間を延長することができますから、より多くの時間を取って充分に試験を準備できます。Pass4Testというサイトのトレーニング資料を利用するかどうかがまだ決まっていなかったら、Pass4Testのウェブで一部の試験問題と解答を無料にダウンローしてみることができます。あなたに向いていることを確かめてから買うのも遅くないですよ。あなたが決して後悔しないことを保証します。
Pass4TestのNS0-180問題と解答は他のNS0-180問題と解答に関連するする参考書よりずっと良いです。これは試験の一発合格を保証できる問題集ですから。この問題集の高い合格率が多くの受験生たちに証明されたのです。Pass4TestのNS0-180問題と解答は成功へのショートカットです。この問題集を利用したら、あなたは試験に準備する時間を節約することができるだけでなく、試験で楽に高い点数を取ることもできます。
NS0-505日本語講座の商品は100%の合格率を保証いたします。NS0-505日本語講座はITに対応性研究続けて、高品質で低価格な問題集が開発いたしました。NS0-505日本語講座の商品の最大の特徴は20時間だけ育成課程を通して楽々に合格できます。
試験番号：NS0-505試験科目：「NetApp Certified Implementation Engineer - SAN Specialist, E-Series」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2016-03-10
問題と解答：全52問 NS0-505日本語講座
試験番号：NS0-180試験科目：「NetApp Certified Storage Installation Engineer, Clustered Data ONTAP」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2016-03-10
問題と解答：全65問 NS0-180問題と解答
Network ApplianceのNS0-180問題と解答は今IT業界の人気試験で多くのIT業界の専門の人士がITの関連の認証試験を取りたいです。Network Applianceの認証試験の合格書を取ってから更にあなたのIT業界での仕事にとても助けがあると思います。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/NS0-180.html
2016-03-11 17:23
nice!(0)
コメント(0)
トラックバック(0)
コメント 0